I2C in LabVIEW

I recently published an Instructable on how to use I2C in LabVIEW using LabVIEW MakerHub LINX, chipKIT WF32, and PmodGYRO as an example. Digilent sells a both LabVIEW Home Bundle and chipKIT WF32 in the LabVIEW Physical Computing Kit. In this Instructable, I go over how to read the data sheet to find what you’re looking for and how exactly to code what you find. This guide also details how to set up pull-up resistors for successful I2C communication.

Read More

Digilent Pmods: Power Pmods

It’s been awhile since we last had some specific focus on Pmods, so I decided that we should get back to our favorite blog series (or at least my favorite). This week we’re going to check out some of the Pmods that occasionally get overlooked– the power Pmods. These Pmods include screw terminal modules, transistor modules, and power monitors.

Read More

I2C — How Does It Work?

Inter-integrated-circuit, more commonly known as I²C (generally pronounced I-squared-C), is a communication style originally developed by Phillips Semiconductor (now NXP Semiconductor). Its design allows multiple components to be able to talk to each other on the same data line, making it widely used in a variety of systems, including Pmods. As a fan of Pmods, I’m in favor of learning how you can communicate with them and get them what you want to do. Let’s find out more.

Read More

Digilent Pmods – Audio Pmods

You may recall a post we had a few days back on the Pmods that offered a DAC. As I mentioned then, DACs are used for a wide variety of applications but one of the most common ways that you see a DAC being used is in audio applications. Digilent’s Pmod line offers several audio peripheral modules that do just that.

Read More

Digilent Pmods: Communication Is Key

We are going to continue with our Pmod series and talk about how you get the Pmod (peripheral module) to do what you want it to do. After all, it is not the best plan (especially in electronics) to just plug something in to a random spot and hope the device works correctly. The vast majority of the peripheral modules in the Pmod line collect or receive data (or both) and need to communicate this data with the host board. A GPS module that doesn’t send its coordinates to the host or an audio amplifier that does not receive data from the host are not terribly useful. Successful communication is key in any relationship, electronic or otherwise.

Read More